NEWS

17/04/2023

TECNICAL INFORMATION

TECNICAL INFORMATION

ELECTRONIC TAPS INSTALLATION

For proper use of Monolith electronic taps,
as indicated in the installation sheet supplied with the product,
we recommend installing a lithium battery and not an alkaline battery.
The lithium battery is more suitable for Monolith taps
and will allow a longer product life.

 

To prevent impurities from entering and blocking the solenoid valve,
on Monolith electronic taps,
it is mandatory to install the filter gasket
which is supplied with the product.
The filter gasket is installed before the solenoid valve,
between the flex and the water supply.

Monolith also sells filter taps
which provide even more security against impurities.

Please do not hesitate to contact us for more information.

 

Monolith electronic taps offer you hygiene and safety
in all circumstances.
The simple infrared activation of the electronic faucet
makes it comfortable and
prevents the risk of contamination.
The sensors are equipped with an anti-vandal safety system
which prevents the continuous water flow.
If the sensor is covered for more than 60 seconds
water will automatically switch off.

Visit our website to discover all our models.

https://www.monolithsrl.com/en/

 

To support your technician team,
here is a video of Monolith electronic taps installation.

 

VIDEO --> https://www.youtube.com/watch?v=q64bnJfGboA

MAINTENANCE OF FOOT OPERATED TAPS

Although Monolith foot operated taps are designed to last over time,
regular maintenance of the product is necessary
to increase its lifespan.

Please do not hesitate to ask us about lubrication instructions.

 

Do you know how Monolith progressive pedal tap works?
The more you press the pedal, the higher the temperature
and the quantity of water.

For more information, please do not hesitate to contact us.

PRE-RINSE UNITS INSTALLATION

How to install Monolith pre-rinse units ?
Here is a video to support your technical department.

 

VIDEO --> https://www.youtube.com/watch?v=kyLPydf1Ua0&t=1s

 

To prevent the flex of Monolith pre-rinse unit from breaking,
the spring must be installed at the right height.
When the hand shower is in use, the flex is stretched a lot
and if the position is not correct, it risks breaking.

Please follow the installation instructions in the sheet
supplied with the product.

 

VIDEO --> https://www.youtube.com/watch?v=ePDUah5LPEo